Skorpion 250 RG/90
Skorpion 250 RG/90 with crawler chain conveyor has been designed for shredding tree limbs and trunks/stubs with diameter of 250 mm.
It’s a mobile disc model with pneumatic blow-out system installed on the disc. Chips are ejected through a rotary chimney which can turn by 360° in relation to the chassis. The machine to collaborate with over 100 hp farm tractor.
The cutting system of this chipper consists of a disc with cutting knives suitable for sharpening on either side. The drive is transmitted from PTO shaft of a tractor with the speed of 1000 revolutions per minute. The essential equipment includes a hydraulic propulsion system that drives the feeding rollers and is driven by its own hydraulic pump.
The construction of the chipper is set on a single axial chassis that enables the device to be towed behind a tractor on forest and field roads. Innovative solution of the lateral position of the feeding table enables simultaneous transport of chipper and trailer with a tractor.
Due to large size of the material to be chipped, the machine can be equipped with a hydraulic mounted crane.
As a standard, the chipper is also additionally equipped with an electronic system of work control, automatically protecting the propulsion system of the machine against overload/excessive duty through temporary stopping the feeding unit.
Chips made by Skorpion 250 RG/90 can be used as a solid fuel for heating in buildings (burning in ovens/stoves), as raw material to produce compost, for decorative purposes in gardens, parks, etc., and after additional disintegrating in a mill for production of pellets and briquettes.
Technical details
MODEL |
SKORPION 250 RG/90 |
Overall dimensions (length x width x height) [mm] |
3400 x 2400 (up to 4000) x 2750 (≈4000) |
Weight [kg] |
1900 without HDS |
Branch diameter [mm] |
250 |
No of knives |
2 or 3 cutting + 2 counter-knife |
Feeding speed [running meters/min] |
up to 42 |
Chipping capacity [stère meters/h] |
up to 18 |
Chip width [mm] |
from 9 to 14 |
Method of feeding |
mechanically by crane or manually |
Disk diameter [mm] |
800 |
Hopper dimensions (width x height) [mm] |
420 x 255 |
Type of drive |
tractor’s PTO |
Min. power of tractor [hp] |
100 |
() - dimension after the pipe is raised, during operation |
Equipment included:
- PTO shaft
- Independent hydraulic system
- Adjustment of height of ejecting the chips
- Rotary chimney 360°
- No-stress system